Featured · ³He
Downhole Gamma Sensors

Downhole Gamma Sensors

Sodium Iodide (NaI) scintillation gamma sensors for gross counting, spectral, and density gamma sensing in MWD/LWD/Wireline.

Sodium Iodide (NaI) scintillation gamma sensors for gross counting, spectral, and density gamma sensing in MWD/LWD/Wireline.
Gas Fill
³He · 1.8 atm
Op Temp
−40 → 200°C
Rated
Reactor / Downhole

Reuter-Stokes’ gamma sensors provide geologists and operators with precise measurements required for accurate formation location and identification. Sodium Iodide (NaI) scintillators with open configuration options. Crystal packages optimized for light output, energy resolution, and sensitivity. Shock survivability to 1,000 g. Random vibration rating of 20 grms. Operating temperatures to 200°C (392°F). Customize crystal size, mounting, interface adaptations, or integrated radioactive calibration sources.

Specifications

Detector type
Proportional counter, ³He fill
Active length
50 – 1,500 mm
Active diameter
15.9 – 50.8 mm
Gas fill
³He @ 1.8 atm (custom 0.5 – 4 atm)
Sensitivity
~7.0 cps/nv (per cm active)
Operating voltage
+1,200 to +1,600 VDC
Plateau slope
<3% per 100 V
Op temperature
−40 °C to +200 °C
Pressure rating
Atm (std) / 20,000 psi (DH)
Gamma rejection
>10⁶ cps/R/h gamma field
Connector
MHV / BNC / Reynolds 167-2754
Certifications
ATEX · IECEx · CSA · UL CL1 D1
Custom Build

Need a different geometry?

If your operating conditions sit outside our standard catalog configurations, our application engineering team will spec a detector to match. Most custom builds reuse proven sensor architectures with tailored mechanical envelopes, connectors, and fill parameters.