Featured · ³He
Flame Tracker Dry 325 (FTD 325) — RS-FS-9009-03 / RS-FS-9010-03

Flame Tracker Dry 325 (FTD 325) — RS-FS-9009-03 / RS-FS-9010-03

Water-cooling-free UV flame sensor with remote electronics; cool end -51°C to 140°C, hot end up to 325°C.

Water-cooling-free UV flame sensor with remote electronics; cool end -51°C to 140°C, hot end up to 325°C.
Gas Fill
³He · 1.8 atm
Op Temp
−40 → 200°C
Rated
Reactor / Downhole

The FTD 325 uses innovative remote electronics technology to eliminate the need for water cooling on both the hot and cool ends. Temperature-sensitive electronics moved to a low spot in the turbine compartment where temperatures are below 140°C operational limits; the electrical signal from the hot end is transmitted to the cool end via a 30-foot mineral-insulated cable, eliminating fragile fiber optic cable. Response time <0.175 seconds. Cool end -51°C to 140°C (-60°F to 284°F); Hot end -51°C to 325°C (-60°F to 617°F).

Specifications

Detector type
Proportional counter, ³He fill
Active length
50 – 1,500 mm
Active diameter
15.9 – 50.8 mm
Gas fill
³He @ 1.8 atm (custom 0.5 – 4 atm)
Sensitivity
~7.0 cps/nv (per cm active)
Operating voltage
+1,200 to +1,600 VDC
Plateau slope
<3% per 100 V
Op temperature
−40 °C to +200 °C
Pressure rating
Atm (std) / 20,000 psi (DH)
Gamma rejection
>10⁶ cps/R/h gamma field
Connector
MHV / BNC / Reynolds 167-2754
Certifications
ATEX · IECEx · CSA · UL CL1 D1
Custom Build

Need a different geometry?

If your operating conditions sit outside our standard catalog configurations, our application engineering team will spec a detector to match. Most custom builds reuse proven sensor architectures with tailored mechanical envelopes, connectors, and fill parameters.