Featured · ³He
Flame Tracker (RS-FS-9001 / RS-FS-9004 / RS-FS-9006)

Flame Tracker (RS-FS-9001 / RS-FS-9004 / RS-FS-9006)

Water-cooled UV flame sensor for gas turbines with <0.025 second response time.

Water-cooled UV flame sensor for gas turbines with <0.025 second response time.
Gas Fill
³He · 1.8 atm
Op Temp
−40 → 200°C
Rated
Reactor / Downhole

The original Flame Tracker employs a water-cooling system to keep the sensor temperature below 150° C. Provides a 4–20 mA industry-standard output signal. Operates reliably with any fuel, with or without steam injection. Low-voltage operation eliminates special wiring and explosion-proof conduit requirements. Response time <0.025 seconds. Temperature range -20°F to +300°F (-30°C to +150°C); 455°F (235°C) with specified water or air cooling. Aeroderivative approved. Quick-disconnect connectors reduce sensor replacement time from hours to minutes.

Specifications

Detector type
Proportional counter, ³He fill
Active length
50 – 1,500 mm
Active diameter
15.9 – 50.8 mm
Gas fill
³He @ 1.8 atm (custom 0.5 – 4 atm)
Sensitivity
~7.0 cps/nv (per cm active)
Operating voltage
+1,200 to +1,600 VDC
Plateau slope
<3% per 100 V
Op temperature
−40 °C to +200 °C
Pressure rating
Atm (std) / 20,000 psi (DH)
Gamma rejection
>10⁶ cps/R/h gamma field
Connector
MHV / BNC / Reynolds 167-2754
Certifications
ATEX · IECEx · CSA · UL CL1 D1
Custom Build

Need a different geometry?

If your operating conditions sit outside our standard catalog configurations, our application engineering team will spec a detector to match. Most custom builds reuse proven sensor architectures with tailored mechanical envelopes, connectors, and fill parameters.