Case Study
•
October 1, 2024
•
7 min read

Reuter-Stokes’ Flame Tracker delivers success to PSC Yazoo City

Reuter-Stokes’ Flame Trackers provide a successful, reliable, and cost-effective solution for Standard Combustion Frame 5 turbines.

Marcus Chen, PhD

Principal Application Engineer · Downhole
RS-N7 compensated neutron logging tool, prepared for downhole deployment in a Permian Basin operator's lab.

The Public Service Commission of Yazoo City (PSCYC) in Mississippi operates a Frame 5 gas turbine that is an essential part of the utility’s combined cycle power plant. Commissioned in 1968, the turbine includes a standard combustion system. The PSCYC utility must prove its readiness and avoid financial penalties by periodically firing up the gas turbine.
 

However, an attempt to start the turbine proved unsuccessful as the flame sensors failed to detect the flame when lit. PSCYC urgently needed to identify a reliable, consistent, cost-competitive flame sensor source.

Reuter-Stokes’ two
sensor offerings

A flame sensor located inside a turbine compartment must operate under environmental temperatures in excess of 150°C. Reuter-Stokes offers two sensor options to meet this environment:
• Reuter-Stokes’ Flame Tracker with a maximum operating temperature of 150°C, requiring the addition of a water-cooling system in the sensor compartment.
• Reuter-Stokes’ Flame Tracker Dry 325 delivers a maximum operating temperature as high as 325°C, at an increased cost. The FTD 325 capably manages the temperature inside the turbine compartment, with no water-cooling system required.

The Standard Combustion Frame 5 gas turbine has a unique physical configuration that includes only two flame sensors, together on one side of the turbine, with both sight tubes positioned toward the turbine compartment wall.

Some Frame 5 Standard Combustion turbines have recessed panels that allow the sight tubes to penetrate the panel wall, with flame sensors mounted in the recessed panels.

This configuration moves the sensor from the turbine compartment’s interior to its exterior. As exterior turbine temperatures are much cooler with a maximum temperature of 85°C, Reuter-Stokes Flame Trackers can be deployed without the need for a water-cooling system. 

Reuter-Stokes’ PSCYC solution

Reuter-Stokes proposed the installation of recessed panels for the PSCYC gas turbine. PSCYC designed, built, and installed panels in the turbine compartment wall with Flame Tracker sensors mounted in the panels. The maximum operating temperature of the Flame Tracker is 150°C with the maximum temperature of the exterior environment at 85°C. This simple and innovative approach appealed to the customer because it saved them both time and money while providing a reliable flame sensing solution.

Achieving customer satisfaction

PSCYC’s gas turbine started up twice during the commissioning test, with the satisfied customer declaring it a success. PSCYC can now reliably start their turbine and prove that when mounted in recessed panels, our Flame Trackers provide a successful, reliable, and cost-effective solution for Standard Combustion Frame 5 turbines.

This new cost-effective installation offers the lower cost Flame Tracker option with no water-cooling system needed. Flame Trackers are exceptionally reliable and can be a big improvement over older Geiger Muller-type sensors or other less effective sensing methods.

Reuter-Stokes is pleased to share drawings and installation methods with new customers, including the installation of Flame Trackers on turbines with no recessed panels or turbines that include panels.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vestibulum eget orci ullamcorper, euismod justo quis, ultrices mi. Donec accumsan sapien eu magna facilisis tempus. Nam varius sollicitudin justo non aliquet. Aenean aliquet lacus massa, eu consequat nunc gravida et. Proin ac elit vel ipsum posuere aliquam. Cras in tellus vitae leo molestie tristique.

What actually drives downhole detector response.

In hac habitasse platea dictumst. Nunc ultrices in erat sit amet dictum. Cras odio sapien, gravida a elementum id, placerat eget magna. Vestibulum consectetur metus eu elit pulvinar porttitor. Quisque vitae elit ligula. Sed eu rhoncus ipsum. Praesent tempus ultrices metus lacinia malesuada.

The detector parameters that actually matter for compensated logging response, in order of magnitude of impact:

The pressure-length tradeoff in practice.

Curabitur porttitor enim nunc, in imperdiet est venenatis id. Nunc molestie sapien sed leo aliquam, nec bibendum nibh dignissim. Cras eu felis vel mauris pretium volutpat. Nulla ultricies sapien at sapien venenatis lobortis. Mauris vel elementum tortor.

Sensitivity-vs-length curves for ³He at 1.0, 1.8, 2.5 and 4.0 atm — measured response from RS-P4 production data, normalized at L=300 mm.

Fusce vel viverra arcu, tempor sagittis leo. Sed ut massa tincidunt, sodales ipsum eu, rhoncus erat. Integer et nunc fermentum, commodo sapien tincidunt, rhoncus massa. Praesent scelerisque non lacus non condimentum. Nullam id dignissim augue.

“

Doubling the gas pressure delivers more sensitivity than doubling the active length — and ships in a smaller, more rugged package.

— Marcus Chen, RS Application Engineering

Sed vitae facilisis nisl. Cras sed dui aliquam, faucibus lacus eget, bibendum ex. Nullam congue justo eu ullamcorper vulputate. Curabitur vitae ligula aliquam, venenatis turpis quis, pellentesque diam. Proin faucibus ultrices vulputate.

Practical guidance for replacement spec.

When spec’ing a replacement detector for a fielded compensated neutron logging string, work the problem in this order:

Integer a volutpat massa, et pulvinar quam. Cras dolor nunc, hendrerit quis mattis eu, placerat a quam. Aenean auctor hendrerit pharetra. Pellentesque eu urna mauris. Donec eu justo sit amet eros porta ullamcorper quis eu est. Phasellus nec volutpat tellus.

More news & events

Blog

Proportional Counters for Radiation Measurement: Principles & Applications

Proportional counters are designed for the detection and measurement of ionizing radiation. They generate an electrical signal that is directly proportional to the energy deposited by the incident radiation, allowing for detection AND the characteri…
READ MORE →
Blog

Simple, Reliable Flame Monitoring – It’s Common Sense

The Reuter-Stokes approach to flame sensing originated in the core of nuclear reactors. Known for precision radiation measurements in harsh environments, the design practices that were learned in the reactor are used to sense flame presence in gas t…
READ MORE →
Blog

The Role of Flame Sensors in Gas Turbines

Infrared flame sensors are popular for industrial burner applications like boilers or furnaces. They are also sometimes used on gas turbines – but there is a drawback to this approach.
READ MORE →
Blog

Paragon x Reuter-Stokes: The New Era of Nuclear

The Paragon and Reuter-Stokes Gamma Metrics Neutron Flux Monitoring Systems (NFMS) strategic collaboration ensures continued reliability, effectively safeguarding a critical component of nuclear safety while addressing challenges such as technologic…
READ MORE →