The Reuter-Stokes Approach
Reuter-Stokes’ flame sensors are are based on a silicon carbide photodiode that directly senses the UV light from a combustion flame. The analog design operates at very high temperatures, is hazardous area rated for Class I Division 2, Zone 2 and Class I Division 1, Zone 1. The sensors also have functional safety SIL certifications.
Reuter-Stokes flame sensors are single piece sensors that need no calibration, configuration, or modeling of the gas turbine. There are no restrictions on operating life or shelf life. They are simple to install and can be used with OEM or third-party control systems – in fact, they are OEM approved by two major gas turbine manufacturers.
The simplicity of the sensors makes them highly reliable, keeping them in operation for over 500 million total operating hours.
A 4-20 milliampere (mA) current loop (an industry standard) provides power and transmits the sensor output. It is low power, less susceptible to electrical noise, and can be supported by commercial meters and loop simulators.
Flame Tracker or Flame Tracker Dry 325?
Reuter-Stokes offers two main types of flame sensors. The Flame Tracker is the original sensor. It is 2.5” X 5 “ and has a maximum operating temperature of 150°C. To operate in most gas turbine applications, it requires water or air cooling to stay below 150°C.
Infrequent but high-impact water leaks led some customers to ask for a sensor that eliminates water cooling. Reuter-Stokes developed the Flame Tracker Dry 325 (FTD 325) to operate without external cooling. The sensor uses a remote electronics construction that moves the temperature sensitive electronics to a cooler location. The hot end is separated from the cool end by a 30-foot mineral insulated cable and the hot end can operate up to 325°C.
The spectra of light from hydrocarbons and hydrogen have a prominent peak at 310 nm from the •OH or hydroxyl radical. The Reuter-Stokes photodiode is designed to match up with the hydroxyl peak at 310 nm. In this way, Reuter-Stokes flame sensors are very sensitive to hydrocarbon and hydrogen flames. Additionally, Reuter-Stokes sensors have excellent fuel flexibility because all hydrocarbon fuels have a similar spectral feature.
Reuter-Stokes’ Flame Tracker Dry 325 (FTD 325) is successfully used on Baker Hughes NovaLT™ gas turbine family (from 12 to 16MW) for combustion flame detection. The NovaLT™ gas turbine is a multi-fuel solution that can start-up and run on different fuels, including natural gas, various blends of natural gas and hydrogen, and 100% hydrogen, providing customers with the flexibility to adapt and meet their specific reliable and sustainable power requirements.