Blog
•
April 1, 2025
•
7 min read

Helium-3: From Conversion to Detection

Helium-3 (³He) proportional counters have very high efficiency detection capabilities and proven scalability advantages over alternative technologies.

Marcus Chen, PhD

Principal Application Engineer · Downhole
RS-N7 compensated neutron logging tool, prepared for downhole deployment in a Permian Basin operator's lab.

Helium-3 (³He) gas is a rare isotope of Helium that has a large neutron capture cross-section, enabling its use as a neutron detection medium. As a secondary benefit, ³He gas exhibits the characteristics of a proportional gas, i.e. a gas that, when an appropriate high-voltage is applied, will produce a charge pulse proportional to energy deposited by charged particles in the gas. Other proportional gases commonly used for detection of x-rays, gamma-rays, alpha, and beta particles include Argon or Nitrogen mixed with polyatomic quench gases such as carbon-dioxide. Detectors making use of these types of gases are referred to as proportional counters or gas-filled proportional counters.

Helium-3 sensitive volume

A typical configuration is shown on the right. A cylindrical housing (cathode) (~.3” – 3” diameter, 2”- 115” length) contains the proportional gas and anode (~0.001” diameter) running axially along the detector. A positive high voltage is applied to the anode relative to the cathode allows for charge produced due to particle interactions in the gas to be drawn toward the anode. In the region near the anode, high electric fields produce secondary charge due to collisions between the initial charges and the molecules of the proportional gas. The result is an amplified signal pulse that can be processed using basic commercial electronics.

For example, the Microstructured Semiconductor Neutron Detectors (MSND) shown below uses a structured silicon charged particle detector coated with a Boron-10 (10B) “reactive film”. The Boron-10 layer converts neutrons into alpha and Lithium-7 ions, which may travel into the semiconductor structure where they deposit charge and generate a charge pulse. In this case, some particle energy is lost in the converter material before the ions enter the silicon detector, and some trajectories exist in which the charged particles do not enter the silicon detector.

In the case of ³He proportional counters, the conversion medium serves as the charge particle detector. A neutron entering the gas volume of the detector is captured by a ³He nucleus, resulting in the emission of charged Triton and proton particles. The Triton and proton then deposit their energy in the 3He gas through ionization. The charge resulting from this ionization is amplified and collected on the anode as described previously. ³He proportional counters have proven scalability advantages over alternative technologies. The MSND example has a stated thermal neutron efficiency of 20%-30%, with a (12.6 mm)² area.

To compare:

  • A 0.5” diameter ³He detector containing 6 atmospheres of gas has an efficiency of ~50%, independent of length.
  • A 1” diameter ³He has a 75% efficiency.
  • A 2” diameter detector has an efficiency of 92%.

Active lengths of up to 72” means very high efficiency detection capabilities are achievable.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vestibulum eget orci ullamcorper, euismod justo quis, ultrices mi. Donec accumsan sapien eu magna facilisis tempus. Nam varius sollicitudin justo non aliquet. Aenean aliquet lacus massa, eu consequat nunc gravida et. Proin ac elit vel ipsum posuere aliquam. Cras in tellus vitae leo molestie tristique.

What actually drives downhole detector response.

In hac habitasse platea dictumst. Nunc ultrices in erat sit amet dictum. Cras odio sapien, gravida a elementum id, placerat eget magna. Vestibulum consectetur metus eu elit pulvinar porttitor. Quisque vitae elit ligula. Sed eu rhoncus ipsum. Praesent tempus ultrices metus lacinia malesuada.

The detector parameters that actually matter for compensated logging response, in order of magnitude of impact:

The pressure-length tradeoff in practice.

Curabitur porttitor enim nunc, in imperdiet est venenatis id. Nunc molestie sapien sed leo aliquam, nec bibendum nibh dignissim. Cras eu felis vel mauris pretium volutpat. Nulla ultricies sapien at sapien venenatis lobortis. Mauris vel elementum tortor.

Sensitivity-vs-length curves for ³He at 1.0, 1.8, 2.5 and 4.0 atm — measured response from RS-P4 production data, normalized at L=300 mm.

Fusce vel viverra arcu, tempor sagittis leo. Sed ut massa tincidunt, sodales ipsum eu, rhoncus erat. Integer et nunc fermentum, commodo sapien tincidunt, rhoncus massa. Praesent scelerisque non lacus non condimentum. Nullam id dignissim augue.

“

Doubling the gas pressure delivers more sensitivity than doubling the active length — and ships in a smaller, more rugged package.

— Marcus Chen, RS Application Engineering

Sed vitae facilisis nisl. Cras sed dui aliquam, faucibus lacus eget, bibendum ex. Nullam congue justo eu ullamcorper vulputate. Curabitur vitae ligula aliquam, venenatis turpis quis, pellentesque diam. Proin faucibus ultrices vulputate.

Practical guidance for replacement spec.

When spec’ing a replacement detector for a fielded compensated neutron logging string, work the problem in this order:

Integer a volutpat massa, et pulvinar quam. Cras dolor nunc, hendrerit quis mattis eu, placerat a quam. Aenean auctor hendrerit pharetra. Pellentesque eu urna mauris. Donec eu justo sit amet eros porta ullamcorper quis eu est. Phasellus nec volutpat tellus.

More news & events

Blog

Proportional Counters for Radiation Measurement: Principles & Applications

Proportional counters are designed for the detection and measurement of ionizing radiation. They generate an electrical signal that is directly proportional to the energy deposited by the incident radiation, allowing for detection AND the characteri…
READ MORE →
Blog

Simple, Reliable Flame Monitoring – It’s Common Sense

The Reuter-Stokes approach to flame sensing originated in the core of nuclear reactors. Known for precision radiation measurements in harsh environments, the design practices that were learned in the reactor are used to sense flame presence in gas t…
READ MORE →
Blog

The Role of Flame Sensors in Gas Turbines

Infrared flame sensors are popular for industrial burner applications like boilers or furnaces. They are also sometimes used on gas turbines – but there is a drawback to this approach.
READ MORE →
Blog

Paragon x Reuter-Stokes: The New Era of Nuclear

The Paragon and Reuter-Stokes Gamma Metrics Neutron Flux Monitoring Systems (NFMS) strategic collaboration ensures continued reliability, effectively safeguarding a critical component of nuclear safety while addressing challenges such as technologic…
READ MORE →