Blog
•
December 1, 2024
•
7 min read

Challenges of detecting and monitoring flames in hydrogen-burning gas turbines

Detecting and monitoring hydrogen flames in gas turbines presents several technical challenges, due to the unique properties of hydrogen and the characteristics of hydrogen combustion. Overcoming these challenges requires specialized flame detection…

Marcus Chen, PhD

Principal Application Engineer · Downhole
RS-N7 compensated neutron logging tool, prepared for downhole deployment in a Permian Basin operator's lab.

Hydrogen combustion challenges

Detecting and monitoring hydrogen flames in combustors presents several technical challenges, due to the unique properties of hydrogen and the characteristics of hydrogen combustion. These challenges stem from factors such as the visibility of the flame, the spectral characteristics of hydrogen combustion, and the potential for combustion instabilities.

The high reactivity of hydrogen can increase the risk of auto-ignition in the premixing section of combustion systems, particularly in systems with very high air inlet temperatures.

Hydrogen flames also exhibit different thermoacoustic behavior than natural gas flames due to their higher flame speed, shorter ignition delay time, and distinct flame stabilization mechanisms. This results in different flame shapes, positions, and reactivity. The high flame speed of hydrogen can result in rapid heat release rates and increased turbulent flow within the combustion chamber.

When burning 100% hydrogen or hydrogen/natural gas mixtures in a gas turbine, these combustion phenomena require many physical design changes.

Component design for hydrogen applications

Advanced combustion control strategies and design modifications are generally required to manage the dynamic behavior of hydrogen combustion and ensure the stable and efficient operation of gas turbines.

When hydrogen is burned instead of natural gas, the exhaust becomes more humid. Moisture in the combustion gases leads to increased heat transfer to the hot gas path components.

Incorporating redundancy and fault-tolerant design features in flame sensor systems enhances reliability and safety in hydrogen-rich combustion environments. Installing multiple sensors at different locations on the gas turbine provides backup functionality and ensures continuous flame monitoring, even in the event of sensor failures. 

Flame sensors are essential

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vestibulum eget orci ullamcorper, euismod justo quis, ultrices mi. Donec accumsan sapien eu magna facilisis tempus. Nam varius sollicitudin justo non aliquet. Aenean aliquet lacus massa, eu consequat nunc gravida et. Proin ac elit vel ipsum posuere aliquam. Cras in tellus vitae leo molestie tristique.

What actually drives downhole detector response.

In hac habitasse platea dictumst. Nunc ultrices in erat sit amet dictum. Cras odio sapien, gravida a elementum id, placerat eget magna. Vestibulum consectetur metus eu elit pulvinar porttitor. Quisque vitae elit ligula. Sed eu rhoncus ipsum. Praesent tempus ultrices metus lacinia malesuada.

The detector parameters that actually matter for compensated logging response, in order of magnitude of impact:

The pressure-length tradeoff in practice.

Curabitur porttitor enim nunc, in imperdiet est venenatis id. Nunc molestie sapien sed leo aliquam, nec bibendum nibh dignissim. Cras eu felis vel mauris pretium volutpat. Nulla ultricies sapien at sapien venenatis lobortis. Mauris vel elementum tortor.

Sensitivity-vs-length curves for ³He at 1.0, 1.8, 2.5 and 4.0 atm — measured response from RS-P4 production data, normalized at L=300 mm.

Fusce vel viverra arcu, tempor sagittis leo. Sed ut massa tincidunt, sodales ipsum eu, rhoncus erat. Integer et nunc fermentum, commodo sapien tincidunt, rhoncus massa. Praesent scelerisque non lacus non condimentum. Nullam id dignissim augue.

“

Doubling the gas pressure delivers more sensitivity than doubling the active length — and ships in a smaller, more rugged package.

— Marcus Chen, RS Application Engineering

Sed vitae facilisis nisl. Cras sed dui aliquam, faucibus lacus eget, bibendum ex. Nullam congue justo eu ullamcorper vulputate. Curabitur vitae ligula aliquam, venenatis turpis quis, pellentesque diam. Proin faucibus ultrices vulputate.

Practical guidance for replacement spec.

When spec’ing a replacement detector for a fielded compensated neutron logging string, work the problem in this order:

Integer a volutpat massa, et pulvinar quam. Cras dolor nunc, hendrerit quis mattis eu, placerat a quam. Aenean auctor hendrerit pharetra. Pellentesque eu urna mauris. Donec eu justo sit amet eros porta ullamcorper quis eu est. Phasellus nec volutpat tellus.

More news & events

Blog

Proportional Counters for Radiation Measurement: Principles & Applications

Proportional counters are designed for the detection and measurement of ionizing radiation. They generate an electrical signal that is directly proportional to the energy deposited by the incident radiation, allowing for detection AND the characteri…
READ MORE →
Blog

Simple, Reliable Flame Monitoring – It’s Common Sense

The Reuter-Stokes approach to flame sensing originated in the core of nuclear reactors. Known for precision radiation measurements in harsh environments, the design practices that were learned in the reactor are used to sense flame presence in gas t…
READ MORE →
Blog

The Role of Flame Sensors in Gas Turbines

Infrared flame sensors are popular for industrial burner applications like boilers or furnaces. They are also sometimes used on gas turbines – but there is a drawback to this approach.
READ MORE →
Blog

Paragon x Reuter-Stokes: The New Era of Nuclear

The Paragon and Reuter-Stokes Gamma Metrics Neutron Flux Monitoring Systems (NFMS) strategic collaboration ensures continued reliability, effectively safeguarding a critical component of nuclear safety while addressing challenges such as technologic…
READ MORE →