Blog
•
July 1, 2024
•
7 min read

What are the benefits of gamma thermometers in nuclear reactors?

As the nuclear industry is growing, gamma thermometers can be an integral piece of your control philosophy and risk mitigation strategy. Learn about the benefits of gamma sensitive detectors for power monitoring in new nuclear plant designs with Reu…

Marcus Chen, PhD

Principal Application Engineer · Downhole
RS-N7 compensated neutron logging tool, prepared for downhole deployment in a Permian Basin operator's lab.

Precise, durable, efficient reactor power measurement

Gamma thermometers (GT) are proven sensors that use differential thermocouples to measure local gamma flux up to reactor full power. Although these gamma thermometers have generally been used in local power range monitors (LPRMs), they can be a fundamental component for new plant designs.
 

Because gamma thermometers require no drive mechanism and remain in place during normal reactor operation, they provide a durable, efficient alternative to gamma traversing in-core probe (TIP) and neutron TIP detectors for LPRM calibration. Unlike neutron TIP detectors, gamma thermometers can provide independent LPRM power readings throughout reactor power operation without sensitivity depletion.

Product configuration and operation

Gamma thermometers are stainless steel rods with short sections that are thermally insulated from the reactor coolant by chambers of Argon gas. Interactions between the gamma flux and stainless steel sensor generate heat in the gamma thermometer. A thermally isolated thermocouple junction and a reactor water-cooled thermocouple junction create a measurable temperature differential that is proportional to the gamma flux. At steady-state reactor power condition, the gamma flux is then used to calibrate fission chamber sensitivity and measure reactor power.

Each gamma thermometer includes an integrated heater wire providing GT calibration against a known heat source independent of the gamma flux. Gamma thermometer calibration provides a repeatable response curve of thermocouple output from a known given heat input which is used to correlate sensor response with gamma flux.
 

Benefits
 

•   Fixed in-core assembly

•  Compact size, no drive equipment required

•  Continuous measurement for in-situ power monitoring
and fission chamber calibration

•  No fissile material

•  Low cobalt construction to minimize neutron activation
lowering radiation exposure and reducing disposal costs

•  More accurate representation of reactor power

FACT:

Reuter-Stokes has several decades of experience manufacturing gamma thermometers which have been used for calibrating LPRM fission chamber detectors in boiling water reactor (BWR) plant designs.

Reuter-Stokes gamma thermometers have been tested in four operating reactors in the U.S., Japan, and Mexico, including multiyear testing for up to ten years.

Gamma Thermometer Applications

Gamma thermometers are typically integrated in LPRMs and installed as a single GT LPRM device for nuclear power instrumentation (non-safety) applications.
 

The U.S. Nuclear Regulatory Commission has outlined a gamma thermometer methodology for calibrating in-core instrumentation in reactor monitoring. Some ASME Code assemblies have included Reuter-Stokes gamma thermometers.

As the nuclear industry is growing, gamma thermometers can be an integral piece of your control philosophy and risk mitigation strategy.

Customizable Solutions

Reuter-Stokes can customize gamma thermometers for a variety of lengths with various chamber lengths and positions, up to a maximum of 9 chamber locations within a GT detector assembly. We can incorporate the GT into a combined assembly with other types of detectors.

Gamma Thermometers Datasheet
DOWNLOAD NOW→

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vestibulum eget orci ullamcorper, euismod justo quis, ultrices mi. Donec accumsan sapien eu magna facilisis tempus. Nam varius sollicitudin justo non aliquet. Aenean aliquet lacus massa, eu consequat nunc gravida et. Proin ac elit vel ipsum posuere aliquam. Cras in tellus vitae leo molestie tristique.

What actually drives downhole detector response.

In hac habitasse platea dictumst. Nunc ultrices in erat sit amet dictum. Cras odio sapien, gravida a elementum id, placerat eget magna. Vestibulum consectetur metus eu elit pulvinar porttitor. Quisque vitae elit ligula. Sed eu rhoncus ipsum. Praesent tempus ultrices metus lacinia malesuada.

The detector parameters that actually matter for compensated logging response, in order of magnitude of impact:

The pressure-length tradeoff in practice.

Curabitur porttitor enim nunc, in imperdiet est venenatis id. Nunc molestie sapien sed leo aliquam, nec bibendum nibh dignissim. Cras eu felis vel mauris pretium volutpat. Nulla ultricies sapien at sapien venenatis lobortis. Mauris vel elementum tortor.

Sensitivity-vs-length curves for ³He at 1.0, 1.8, 2.5 and 4.0 atm — measured response from RS-P4 production data, normalized at L=300 mm.

Fusce vel viverra arcu, tempor sagittis leo. Sed ut massa tincidunt, sodales ipsum eu, rhoncus erat. Integer et nunc fermentum, commodo sapien tincidunt, rhoncus massa. Praesent scelerisque non lacus non condimentum. Nullam id dignissim augue.

“

Doubling the gas pressure delivers more sensitivity than doubling the active length — and ships in a smaller, more rugged package.

— Marcus Chen, RS Application Engineering

Sed vitae facilisis nisl. Cras sed dui aliquam, faucibus lacus eget, bibendum ex. Nullam congue justo eu ullamcorper vulputate. Curabitur vitae ligula aliquam, venenatis turpis quis, pellentesque diam. Proin faucibus ultrices vulputate.

Practical guidance for replacement spec.

When spec’ing a replacement detector for a fielded compensated neutron logging string, work the problem in this order:

Integer a volutpat massa, et pulvinar quam. Cras dolor nunc, hendrerit quis mattis eu, placerat a quam. Aenean auctor hendrerit pharetra. Pellentesque eu urna mauris. Donec eu justo sit amet eros porta ullamcorper quis eu est. Phasellus nec volutpat tellus.

More news & events

Blog

Proportional Counters for Radiation Measurement: Principles & Applications

Proportional counters are designed for the detection and measurement of ionizing radiation. They generate an electrical signal that is directly proportional to the energy deposited by the incident radiation, allowing for detection AND the characteri…
READ MORE →
Blog

Simple, Reliable Flame Monitoring – It’s Common Sense

The Reuter-Stokes approach to flame sensing originated in the core of nuclear reactors. Known for precision radiation measurements in harsh environments, the design practices that were learned in the reactor are used to sense flame presence in gas t…
READ MORE →
Blog

The Role of Flame Sensors in Gas Turbines

Infrared flame sensors are popular for industrial burner applications like boilers or furnaces. They are also sometimes used on gas turbines – but there is a drawback to this approach.
READ MORE →
Blog

Paragon x Reuter-Stokes: The New Era of Nuclear

The Paragon and Reuter-Stokes Gamma Metrics Neutron Flux Monitoring Systems (NFMS) strategic collaboration ensures continued reliability, effectively safeguarding a critical component of nuclear safety while addressing challenges such as technologic…
READ MORE →