Blog
•
November 1, 2024
•
7 min read

Reactor instrumentation for the new era of nuclear power

Now, more than ever, nuclear energy is needed to supply the world with reliable, low emissions power. As demand grows, so do concerns about safety and security. That’s where Reuter-Stokes comes in. 

Marcus Chen, PhD

Principal Application Engineer · Downhole
RS-N7 compensated neutron logging tool, prepared for downhole deployment in a Permian Basin operator's lab.

Pioneering nuclear energy

Now, more than ever, nuclear energy is needed to supply the world with reliable, low emissions power. As demand grows, so do concerns about safety and security. 

That’s where Reuter-Stokes comes in.

From neutron monitors to traversing in-core probes, mechanical drive equipment and environmental radiation monitors, Reuter-Stokes provides the nuclear instrumentation you need to operate your reactor safely and reliably. And, as nuclear plants apply for life extensions and power uprates, Reuter-Stokes is also your partner for advanced controls, radiation monitoring solutions and comprehensive service agreements.

No matter what your needs in nuclear power generation, we can help. Our local power range monitors (LPRMs), moveable in-core detectors (MIC), in-core and ex-core sensors and accompanying electronics provide quality data, enabling analysis that can result in fewer outages due to equipment failure and the prevention and avoidance of incidents. We are your single source provider for nuclear energy solutions for the 21st century.

Our expertise extends beyond just BWR instrumentation. As the nuclear landscape has grown, so has our portfolio of solutions. Reuter-Stokes can provide the right nuclear instrumentation, radiation monitoring and control solutions to help your plant succeed in the new era of nuclear.

Reuter-Stokes has a comprehensive suite of hardware, software and services to keep your reactor operating safely and trouble-free for its entire lifecycle.
 

Boiling Water Reactor (BWR)

Advanced BWR (ABWR)

Economic Simplified BWR (ESBWR)

Pressurized Water Reactor (PWR)

Pressurized Heavy Water Reactor (PHWR)

Research Reactor

Reuter-Stokes’ end-of-life analysis ended up saving us two LPRMs. Based on Reuter-Stokes’ analysis of our instruments’ end-of-life calculations, we didn’t need to replace the LPRMs as we had originally thought. This is the first time in 30 years that we were able to start up our unit with all of our detectors in service.

Nuclear instrumentation – the heart of the reactor

Nuclear instrumentation is integral to the functioning of the nuclear power plant. Without monitoring equipment, operators would not have a feedback loop to ensure that the reactor is operating safely and within specification limits. Nuclear instrumentation enables control room technicians to identify the status of the nuclear reactor power output, as well as alerting the control room immediately if the reactor operates outside of normal conditions. When plant availability is crucial, there is no room for downtime.

For such an essential role, you need reliable instrumentation and equipment.

The best technology to keep you positioned for safe and profitable operation

For nearly 70 years, Reuter-Stokes has been designing advanced applications and changing the way energy is produced worldwide. And we continue to invest in technologies to improve the operation of nuclear plants around the globe.

Our nuclear instrumentation also has deep roots. Beginning with the first Reuter-Stokes Helium-3 neutron detector in 1956 that led to the development of LPRMs, we have been committed to excellence in nuclear instrumentation ever since.

Building on our vast success providing sensors and monitoring equipment to BWR customers, we introduced our Moveable In-Core (MIC) detector in 1968 to be used by PWR utilities. Able to map the thermal neutron flux in the water gap between adjacent fuel bundles, our MIC detector has been installed in power plants worldwide. Combining the electronics of reactor controls, we provide a customized, comprehensive solution for all of your BWR and PWR nuclear instrumentation and control needs.

From research and development of the next technology game-changer to improving our existing hardware components and connections, we are committed to innovation. We have deep domain knowledge of your plant, enabling us to provide better, more detailed support. 

Designed and built for quality

Beginning with our use of Six Sigma® design and manufacturing methodologies, we make product quality and performance our priority in every step of the process. We incorporate rigorous and extensive testing at all stages of the design, production and pre-installation, resulting in ex-core and in-core hardware that are designed to work reliably.

We perform testing at each major milestone, ranging from materials screening, in-process testing and final evaluation, both onsite and in research reactors around the world. This comprehensive testing methodology contributes to detectors that perform accurately and reliably, improving reactor availability as well as reducing maintenance costs. And with one of the best warranty provisions in the industry, we stand behind our products.

Reuter Stokes’ technical depth and global presence uniquely qualifies us to respond to special customer needs. Whether there is an immediate, unforeseen outage need, or a request for a custom design, Reuter-Stokes can deliver quality products and services, on-time. Examples of custom monitoring instrumentation include:

  • Installation site constraints

  • Special material requirements

  • Disposal concerns

  • Sensors requiring expertise in pressure boundary design

Installation site constraints

Special material requirements

Disposal concerns

Sensors requiring expertise in pressure boundary design

With thousands of LPRMs installed worldwide, you can trust Reuter-Stokes’ nuclear instrumentation to keep your plant running safely and reliably with our suite of optimization and control solutions.

Partner with an expert

Quality you can count on

ASME NQA-1

ASME Section III “N stamp”

ISO9001:2015

CSA N299 series

10 CFR Part 21

10 CFR

Part 50 Appendix B

BWR

In-Core Fission Chambers
 

•  Local Power Range Monitors (LPRM)

•  Source Range Monitors (SRM)

•  Intermediate Range Neutron Monitors (IRNM)

•  Wide Range Neutron Monitors (WRNM)

•  Neutron Traversing In-Core Probes (TIP)
 

 

Ion Chambers
 

•  Gamma Traversing In-Core Probes

•  Insulated Detectors

•  Environmental Radiation Monitors

 
 

Movable In-Core Neutron Detectors
 

•  Neutron Traversing In-Core Probes

•  Source Range Monitors

•  Intermediate Range Neutron Monitors

Associated hardware

Cables

Connectors

Mechanical
Drive Equipment

Disposal
Equipment

PWR

Ex-Core Fission Chambers
 

•  Power Range Monitors
 

•  Source Range Monitors
 

•  Intermediate Range Neutron Monitors
 

•  Wide Range Neutron Monitors
 

•  Movable In-Core Detectors

Ion Chambers

•  Boron-10 Lined Ion Chambers
 

•  Boron-10 Lined Proportional Counters
 

•  Environmental Radiation Monitors

Supporting services for nuclear instrumentation

At Reuter-Stokes, we realize the importance of reliability and availability. Every minute lost without producing power means lost revenue. That’s why reducing non-productive time is the primary focus of our services group. Whether it is reducing your outage duration through pre-outage planning and on-site outage support, or promptly troubleshooting your nuclear instrumentation in real-time to keep your reactor running, the goal of our services group is to improve the reliability and availability of your nuclear instrumentation.

We also realize that reliability and availability represent only one half of the equation for profitable growth; operations and maintenance cost is also an important part of plant operations. When offered within the context of a long-term agreement, Reuter-Stokes’ services offering also provides utilities with the benefit of predictable cash flow, a key element in your ongoing cost-control efforts.

Last, but not least, we understand the value you place on knowledge and expertise. As an original equipment manufacturer of nuclear reactor instrumentation, Reuter-Stokes is uniquely qualified to offer expert advice to optimize your system performance. Our highly experienced services staff stands ready, not only to tackle the challenges you face today, but also to train and collaborate with your personnel to improve your productivity, enhance your knowledge base and to help you prepare to face tomorrow’s challenges.

Monitoring and diagnostics

End-of-lifetime calculations
 

Trouble-shooting
 

System engineering – upgrade or reconfigure
 

Engineering services
 

Installation
 

Post-installation testing
 

Long-term service agreements
 

Inventory management

 

Training

Onsite: customized for your reactor
 

Classroom: helping ease the transition of personnel turnover
 

Fully equipped BWR test center
 

Hands on: functional operation and maintenance
 

Nuclear Instrumentation: testing and diagnostics

The comprehensive nuclear solution

Boiling Water Reactor (BWR), Pressurized Water Reactor (PWR), and advanced Small Modular Reactor (SMR) projects require experienced partners with the expertise, proven product reliability, and design/manufacturing experience to run their reactors as safely and efficiently as possible. Contact Reuter-Stokes today to talk to an expert about your nuclear instrumentation needs.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vestibulum eget orci ullamcorper, euismod justo quis, ultrices mi. Donec accumsan sapien eu magna facilisis tempus. Nam varius sollicitudin justo non aliquet. Aenean aliquet lacus massa, eu consequat nunc gravida et. Proin ac elit vel ipsum posuere aliquam. Cras in tellus vitae leo molestie tristique.

What actually drives downhole detector response.

In hac habitasse platea dictumst. Nunc ultrices in erat sit amet dictum. Cras odio sapien, gravida a elementum id, placerat eget magna. Vestibulum consectetur metus eu elit pulvinar porttitor. Quisque vitae elit ligula. Sed eu rhoncus ipsum. Praesent tempus ultrices metus lacinia malesuada.

The detector parameters that actually matter for compensated logging response, in order of magnitude of impact:

The pressure-length tradeoff in practice.

Curabitur porttitor enim nunc, in imperdiet est venenatis id. Nunc molestie sapien sed leo aliquam, nec bibendum nibh dignissim. Cras eu felis vel mauris pretium volutpat. Nulla ultricies sapien at sapien venenatis lobortis. Mauris vel elementum tortor.

Sensitivity-vs-length curves for ³He at 1.0, 1.8, 2.5 and 4.0 atm — measured response from RS-P4 production data, normalized at L=300 mm.

Fusce vel viverra arcu, tempor sagittis leo. Sed ut massa tincidunt, sodales ipsum eu, rhoncus erat. Integer et nunc fermentum, commodo sapien tincidunt, rhoncus massa. Praesent scelerisque non lacus non condimentum. Nullam id dignissim augue.

“

Doubling the gas pressure delivers more sensitivity than doubling the active length — and ships in a smaller, more rugged package.

— Marcus Chen, RS Application Engineering

Sed vitae facilisis nisl. Cras sed dui aliquam, faucibus lacus eget, bibendum ex. Nullam congue justo eu ullamcorper vulputate. Curabitur vitae ligula aliquam, venenatis turpis quis, pellentesque diam. Proin faucibus ultrices vulputate.

Practical guidance for replacement spec.

When spec’ing a replacement detector for a fielded compensated neutron logging string, work the problem in this order:

Integer a volutpat massa, et pulvinar quam. Cras dolor nunc, hendrerit quis mattis eu, placerat a quam. Aenean auctor hendrerit pharetra. Pellentesque eu urna mauris. Donec eu justo sit amet eros porta ullamcorper quis eu est. Phasellus nec volutpat tellus.

More news & events

Blog

Proportional Counters for Radiation Measurement: Principles & Applications

Proportional counters are designed for the detection and measurement of ionizing radiation. They generate an electrical signal that is directly proportional to the energy deposited by the incident radiation, allowing for detection AND the characteri…
READ MORE →
Blog

Simple, Reliable Flame Monitoring – It’s Common Sense

The Reuter-Stokes approach to flame sensing originated in the core of nuclear reactors. Known for precision radiation measurements in harsh environments, the design practices that were learned in the reactor are used to sense flame presence in gas t…
READ MORE →
Blog

The Role of Flame Sensors in Gas Turbines

Infrared flame sensors are popular for industrial burner applications like boilers or furnaces. They are also sometimes used on gas turbines – but there is a drawback to this approach.
READ MORE →
Blog

Paragon x Reuter-Stokes: The New Era of Nuclear

The Paragon and Reuter-Stokes Gamma Metrics Neutron Flux Monitoring Systems (NFMS) strategic collaboration ensures continued reliability, effectively safeguarding a critical component of nuclear safety while addressing challenges such as technologic…
READ MORE →